{"product_id":"vision-hdmi-over-ip-receiver-av-receiver-black-tc-hdmiiprx3","title":"Vision HDMI-over-IP Receiver AV receiver Black","description":"\u003cstyle\u003etable.generic tr th {background: #eee;}\u003c\/style\u003e 92 x 67 x 168 mm, 150g, 6.75Gbps, 1.3 HDMI, 1920 x 1200, 10 - 50C, 1.5m, 100 - 240V, 50 \/ 60Hz, CAT5E\/6, Metal\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eDistributes HDMI via a network\u003c\/li\u003e\n\u003cli\u003eH.265 compression\u003c\/li\u003e\n\u003cli\u003eOne-to-One directly over a LAN or directly\u003c\/li\u003e\n\u003cli\u003eOne-to-Many over LAN\u003c\/li\u003e\n\u003cli\u003eIR Pass-through\u003c\/li\u003e\n\u003cli\u003eUSB 1.1 transmission\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDescription\u003c\/h2\u003eThe TC-HDMIIP\/3 converts HDMI signal into TCP\/IP packets for transmission over a standard LAN network. With no visible loss of video quality it is perfect for corporate and digital signage applications.\u003cbr\u003e\u003cbr\u003eBeware of cheap alternatives that flood your network!\u003cbr\u003e\u003cbr\u003eUSB Over Network\u003cbr\u003eIt can support USB version 1.1 from the transmitter to all receivers. Each receiver has two USB ports for adding flexibility. This is for USB peripherals like keyboard, mice, but not applications that demand high bandwidth like interactive displays.   \u003cbr\u003e\u003cbr\u003eScalable\u003cbr\u003eTransmitters and receivers sold separately so you can scale your system.\u003cbr\u003e\u003cbr\u003eAdvanced EDID Copy\u003cbr\u003eA reset button restores EDID to default, or for advanced applications holding either of the reset buttons down will copy the display EDID to the transmitter.\u003cbr\u003e\u003cbr\u003eOne to Many\u003cbr\u003eNeed to display one source on many screens? This product multi-casts, so you can have one transmitter for the source, and over 100 x receivers can sit on the network – one for each display. Only one transmitter per network.\u003cbr\u003e\u003cbr\u003ePoint to Point without LAN\u003cbr\u003eConnect one transmitter directly to a receiver and completely bypass a network. This will work with a standard CAT6 cable up to 150 m (492 ft) on a high quality cable.\u003cbr\u003e\u003cbr\u003eMaximum Length\u003cbr\u003eWhen using a LAN the signal will be repeated by each node on the network, resulting in unlimited length.\u003cbr\u003e\u003cbr\u003eHD\u003cbr\u003eFully HDCP 1.4 compliant, it supports resolutions up to 1920 x 1200 @ 60 Hz.\u003cbr\u003e\u003cbr\u003eAudio\u003cbr\u003eDigital audio which is encoded on the HDMI signal is transmitted.\u003cbr\u003e\u003cbr\u003eIR Pass-Through\u003cbr\u003eControl the source device from the display with the IR pass-through. An IR blaster and receiver cable is included, and it supports standard 20-60 kHz IR signals.\u003cbr\u003e\u003cbr\u003ePlug and Play\u003cbr\u003eEDID (extended display identification data) is automatically passed through. Just connect everything together and it will work immediately.\u003cbr\u003e\u003cbr\u003eH.265 Compression\u003cbr\u003eVideo is compressed using the H.265 protocol. Images are full colour with smooth motion.\u003cbr\u003e\u003cbr\u003eLAN Protocols\u003cbr\u003eDespite using the standard IP protocols you don’t need to be a network engineer. All end points must be on the same subnet… that’s all you need to know. For best results use a stand-alone network for this system.\u003cbr\u003e\u003cbr\u003eDual-Power\u003cbr\u003eThis product requires a power supply for each transmitter and receiver. It does not use PoE.\u003cbr\u003e\u003cbr\u003eUnmanaged Switch\u003cbr\u003eMany video-over-IP solutions require a managed switch so that IGMP snooping can be enabled, but in this case no advanced switch setup is required. A low cost unmanaged switch can be used.\u003cbr\u003e\u003cbr\u003eMultiple Sources\u003cbr\u003eIf you need more than one source to be distributed over one physical LAN you can use Virtual LANs to separate the topologies. The systems are kept separate and cannot be used as a matrix. A DHCP switch assigns IP addresses to each end point and is used to create the vLANs.\u003cbr\u003e\u003cbr\u003eAuto Standby\u003cbr\u003eIf the input is shut off the display will be allowed to go to sleep.\u003cbr\u003e\u003cbr\u003eNot Backward Compatible\u003cbr\u003eThis version uses a Sigmastar chipset and is not compatible with the previous v2 product which uses a HiSilicon chipset. \u003ch2\u003eSpecifications\u003c\/h2\u003e","brand":"Vision","offers":[{"title":"Default Title","offer_id":57269998649689,"sku":"TC-HDMIIPRX\/3","price":181.89,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0882\/5874\/0569\/files\/9zNeMAFow0yGGjK2_kPigg.c-m.jpg?v=1781420228","url":"https:\/\/an-electronics.com\/products\/vision-hdmi-over-ip-receiver-av-receiver-black-tc-hdmiiprx3","provider":"AN Electronics","version":"1.0","type":"link"}