Description
Stackable L3-managed multi-gig access switch, 36x GE, 12x 2.5 GE, 4x SFP+-, 2x QSFP+-FleX-ports, PoE+ (802.3at), hot-swappable PSU (820W/1.440W w 2nd PSU), red. fan (N+1), 372 Gbps throughput, rack mount rails, EU-cable, Limited Lifetime Warranty
This fully managed multi-Gigabit access switch with Power over Ethernet and full layer 3 functions is the ideal solution for demanding infrastructures in enterprise environments. With its extensive industry-standard port equipment, it offers enormous performance even at high workloads and enables uplinking and stacking. Professional redundancy functions and LANCOM fail-safe stacking guarantee fail-safe operation with the best protection covered by the LANCOM Limited Lifetime Warranty (LLW). Orchestrated via the LANCOM Management Cloud, its configuration is automated.
Advantages
High performance on 54 ports
The LANCOM GS-4554XP is equipped with 12x 2.5 multi-Gigabit PoE+ Ethernet ports, 36x Gigabit PoE+ Ethernet ports, as well as 4 SFP+ and 2 QSFP+ FleX ports supporting transmission rates of 10 and 40 Gbps respectively. In addition, with a data throughput of 372 Gbps on the backplane, it offers wirespeed performance even at high workloads. The multi-Gigabit access switch thus forms the powerful basis for modern network infrastructures in all industries and areas of application.
A high-performance basis for Wi-Fi 6 – PoE included
Thanks to 12 high-performance 2.5 Gigabit Ethernet ports, the LANCOM GS-4554XP is the ideal LAN-side basis for integrating the new wireless LAN standard Wi-Fi 6 into modern infrastructures. The increased data rates when using Wi-Fi 6 require 2.5 Gigabit Ethernet, as the required performance demands exceed those of a simple Gigabit Ethernet port. This switch in combination with the corresponding PoE power thus enables the operation of up to 12 Wi-Fi 6 access points or other network components with high performance requirements – without additional electrical installation.
Central power supply without additional electrical installation
As a powerful PoE switch, the LANCOM GS-4554XP supplies connected PoE end devices without additional power supplies or power cabling. It supports the Power over Ethernet standards IEEE 802.3af (PoE) and IEEE 802.3at (PoE+) with up to 30 watts per port. Thanks to high power reserves, a PoE budget of 1,440 watts is available when using both power supplies in power mode, making it ideal for efficiently powering PoE end devices with high energy requirements.
Redundant network topologies with high-performance stacking
Stacking allows up to eight physical switches to be combined into one logical unit for convenient maintenance and management – at a single site or even distributed across different sites. Via the nonstop forwarding function, the stack manager cyclically supplies its standby with current information such as the MAC table and its own status information. In the event of a failure, the standby manager is able to take over without noticeable network interruption via the hitless failover function. Subsequent expansion of the network is also possible, as the new switch receives its configuration automatically from the stack manager and is ready for use within seconds. The stacking function can also be activated on both the front SFP+ FleX ports and the rear QSFP+ FleX ports, enabling a mixed stack with the LANCOM XS-5110F and XS-5116QF aggregation switches.
Full control over your investment
Fully equipped ex works, ready for immediate use, everything from a single source: In accordance with the principle of "Total Cost of Ownership" (TCO), the LANCOM GS-4554XP gives you planning security from the very beginning and at all times with regard to the acquisition costs for your network expansion. The full expansion with all necessary ports in the industry standard makes time-consuming and costly retrofitting of proprietary port modules a thing of the past. Furthermore, our accessories portfolio provides you with the necessary SFP modules and direct attach cables directly from us in tested LANCOM quality. In addition to the guarantee of maximum operational reliability through extensive load and long-term tests of the modules, you also avoid long delivery times.
Full layer 3 routing for high network efficiency
The LANCOM GS-4554XP is full layer 3 capable with policy-based dynamic routing via OSPF, providing dynamic network routes through one or more network segments. This provides tremendous increase in network efficiency for example in meshed networks with multiple aggregation switches at different locations.
Hardware redundancy
The LANCOM GS-4554XP with a "hot-swappable" PSU (power supply unit) allows the power supply to be replaced quickly and without interruption in the event of a defect. A separate plug-in module allows the addition of a second PSU. With the integration of two redundant power supply units, for example, highly fail-safe scenarios can be realized or the PoE power can be bundled and thus doubled. In addition, the redundant (N+1) fan concept also ensures fail-safe switch operation in case one of the two fans fails.
Front-to-back ventilation design
The LANCOM GS-4554XP protects your investment with an innovative front-to-back ventilation design. This enables optimal cooling even in 19" racks and maximizes the lifetime of the device.
Cloud-managed LAN and switch stacking
With the LANCOM Management Cloud, the LANCOM GS-4554XP offers fast and easy network integration as well as automatic configuration assignment. Cloud-managed LAN replaces individual device configuration with holistic network orchestration and enables automatic VLAN assignment to the desired switch ports. Configurations can be rolled out or updated simultaneously at the click of a mouse and even more complex networking scenarios easy to administer. When using the LANCOM GS-4554XP in a stack, Cloud-managed switch stacking also ensures convenient management and monitoring of the entire stack. The cloud independently detects which and how many switches belong to the stack.
Secure remote management
Secure communication protocols such as SSH, SSL and SNMPv3 mean that the LANCOM GS-4554XP is ideal for professional remote network management. The switch also supports the TACACS+ protocol for authentication, authorization and accounting. This solution is optimized for maximum security for multi-site network management and monitoring.
LANCOM Limited Lifetime Warranty (LLW)
This enterprise switch is reliably covered ex factory by the LANCOM Limited Lifetime Warranty. Regardless of the switch's operating time, the replacement service is valid until the End of Life status of the device (max. 10 years). For perfect complement: Ensure minimal downtime in the event of a hardware defect with next-business-day delivery of a replacement device. We recommend LANcare NBD Replacement or in combination with guaranteed service times LANcare Direct Advanced 24/7 or 10/5.
Key Features
- Multi-Gigabit Access Switch with 12x 2.5 multi-Gigabit Ethernet ports, 36x 1 Gigabit Ethernet ports, 4x 10G SFP+ ports, and 2x 40G QSFP+ uplink or stacking ports
- IEEE 802.3af/at PoE+ support to efficiently power connected devices at 720 watts (1,440 watts with second PSU)
- Full layer 3 functionality with policy-based dynamic routing and DHCP server function
- Backplane stacking optionally (SW-defined) via SFP+ or QSFP+ FleX ports
- 1x hot-swappable PSU plus separate bay for adding a second PSU
- 2x fixed, redundant fans (N+1)
- Front-to-back ventilation design for optimal cooling in 19" racks
- Industry standard CLI
- Cloud-managed LAN and switch stacking for quick configuration and convenient management via the LANCOM Management Cloud
- IPv6 and IPv4 support for modern enterprise networks
Description
Stackable full layer 3 multi-Gigabit access switch with PoE+This fully managed multi-Gigabit access switch with Power over Ethernet and full layer 3 functions is the ideal solution for demanding infrastructures in enterprise environments. With its extensive industry-standard port equipment, it offers enormous performance even at high workloads and enables uplinking and stacking. Professional redundancy functions and LANCOM fail-safe stacking guarantee fail-safe operation with the best protection covered by the LANCOM Limited Lifetime Warranty (LLW). Orchestrated via the LANCOM Management Cloud, its configuration is automated.
Advantages
High performance on 54 ports
The LANCOM GS-4554XP is equipped with 12x 2.5 multi-Gigabit PoE+ Ethernet ports, 36x Gigabit PoE+ Ethernet ports, as well as 4 SFP+ and 2 QSFP+ FleX ports supporting transmission rates of 10 and 40 Gbps respectively. In addition, with a data throughput of 372 Gbps on the backplane, it offers wirespeed performance even at high workloads. The multi-Gigabit access switch thus forms the powerful basis for modern network infrastructures in all industries and areas of application.
A high-performance basis for Wi-Fi 6 – PoE included
Thanks to 12 high-performance 2.5 Gigabit Ethernet ports, the LANCOM GS-4554XP is the ideal LAN-side basis for integrating the new wireless LAN standard Wi-Fi 6 into modern infrastructures. The increased data rates when using Wi-Fi 6 require 2.5 Gigabit Ethernet, as the required performance demands exceed those of a simple Gigabit Ethernet port. This switch in combination with the corresponding PoE power thus enables the operation of up to 12 Wi-Fi 6 access points or other network components with high performance requirements – without additional electrical installation.
Central power supply without additional electrical installation
As a powerful PoE switch, the LANCOM GS-4554XP supplies connected PoE end devices without additional power supplies or power cabling. It supports the Power over Ethernet standards IEEE 802.3af (PoE) and IEEE 802.3at (PoE+) with up to 30 watts per port. Thanks to high power reserves, a PoE budget of 1,440 watts is available when using both power supplies in power mode, making it ideal for efficiently powering PoE end devices with high energy requirements.
Redundant network topologies with high-performance stacking
Stacking allows up to eight physical switches to be combined into one logical unit for convenient maintenance and management – at a single site or even distributed across different sites. Via the nonstop forwarding function, the stack manager cyclically supplies its standby with current information such as the MAC table and its own status information. In the event of a failure, the standby manager is able to take over without noticeable network interruption via the hitless failover function. Subsequent expansion of the network is also possible, as the new switch receives its configuration automatically from the stack manager and is ready for use within seconds. The stacking function can also be activated on both the front SFP+ FleX ports and the rear QSFP+ FleX ports, enabling a mixed stack with the LANCOM XS-5110F and XS-5116QF aggregation switches.
Full control over your investment
Fully equipped ex works, ready for immediate use, everything from a single source: In accordance with the principle of "Total Cost of Ownership" (TCO), the LANCOM GS-4554XP gives you planning security from the very beginning and at all times with regard to the acquisition costs for your network expansion. The full expansion with all necessary ports in the industry standard makes time-consuming and costly retrofitting of proprietary port modules a thing of the past. Furthermore, our accessories portfolio provides you with the necessary SFP modules and direct attach cables directly from us in tested LANCOM quality. In addition to the guarantee of maximum operational reliability through extensive load and long-term tests of the modules, you also avoid long delivery times.
Full layer 3 routing for high network efficiency
The LANCOM GS-4554XP is full layer 3 capable with policy-based dynamic routing via OSPF, providing dynamic network routes through one or more network segments. This provides tremendous increase in network efficiency for example in meshed networks with multiple aggregation switches at different locations.
Hardware redundancy
The LANCOM GS-4554XP with a "hot-swappable" PSU (power supply unit) allows the power supply to be replaced quickly and without interruption in the event of a defect. A separate plug-in module allows the addition of a second PSU. With the integration of two redundant power supply units, for example, highly fail-safe scenarios can be realized or the PoE power can be bundled and thus doubled. In addition, the redundant (N+1) fan concept also ensures fail-safe switch operation in case one of the two fans fails.
Front-to-back ventilation design
The LANCOM GS-4554XP protects your investment with an innovative front-to-back ventilation design. This enables optimal cooling even in 19" racks and maximizes the lifetime of the device.
Cloud-managed LAN and switch stacking
With the LANCOM Management Cloud, the LANCOM GS-4554XP offers fast and easy network integration as well as automatic configuration assignment. Cloud-managed LAN replaces individual device configuration with holistic network orchestration and enables automatic VLAN assignment to the desired switch ports. Configurations can be rolled out or updated simultaneously at the click of a mouse and even more complex networking scenarios easy to administer. When using the LANCOM GS-4554XP in a stack, Cloud-managed switch stacking also ensures convenient management and monitoring of the entire stack. The cloud independently detects which and how many switches belong to the stack.
Secure remote management
Secure communication protocols such as SSH, SSL and SNMPv3 mean that the LANCOM GS-4554XP is ideal for professional remote network management. The switch also supports the TACACS+ protocol for authentication, authorization and accounting. This solution is optimized for maximum security for multi-site network management and monitoring.
LANCOM Limited Lifetime Warranty (LLW)
This enterprise switch is reliably covered ex factory by the LANCOM Limited Lifetime Warranty. Regardless of the switch's operating time, the replacement service is valid until the End of Life status of the device (max. 10 years). For perfect complement: Ensure minimal downtime in the event of a hardware defect with next-business-day delivery of a replacement device. We recommend LANcare NBD Replacement or in combination with guaranteed service times LANcare Direct Advanced 24/7 or 10/5.
Specifications
| Management features | |
|---|---|
| ARP inspection | Yes |
| Switch type | Managed |
| Web-based management | Yes |
| Quality of Service (QoS) support | Yes |
| Multicast support | Yes |
| Switch layer | L3 |
| Cloud-managed | Yes |
| Ports & interfaces | |
| SFP+ module slots quantity | 4 |
| QSFP+ module slots quantity | 2 |
| Basic switching RJ-45 Ethernet ports quantity | 54 |
| Basic switching RJ-45 Ethernet ports type | 2.5G Ethernet (100/1000/2500) |
| Gigabit Ethernet (copper) ports quantity | 36 |
| USB 2.0 ports quantity | 1 |
| Console port | RJ-45/Micro-USB |
| 2.5G Ethernet (copper) ports quantity | 12 |
| Network | |
| Networking standards | IEEE 802.1D, IEEE 802.1Q, IEEE 802.1Qav, IEEE 802.1Qbb, IEEE 802.1ab, IEEE 802.1ad, IEEE 802.1ak, IEEE 802.1p, IEEE 802.1s, IEEE 802.1v, IEEE 802.1w, IEEE 802.1x, IEEE 802.3, IEEE 802.3ab, IEEE 802.3ac, IEEE 802.3ad, IEEE 802.3ae, IEEE 802.3af, IEEE 802.3at, IEEE 802.3az, IEEE 802.3bj, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z |
| VLAN support | Yes |
| Spanning tree protocol | Yes |
| Rate limiting | Yes |
| Port mirroring | Yes |
| Number of VLANs | 4093 |
| Link aggregation | Yes |
| Flow control support | Yes |
| Ethernet LAN data rates | 1000,100,2500 Mbit/s |
| Broadcast storm control | Yes |
| 10G support | No |
| Policy-based routing | Yes |
| IGMP snooping | Yes |
| IGMP proxy | Yes |
| Data transmission | |
| Jumbo frames | 12288 |
| Packet buffer memory | 4 MB |
| MAC address table | 32000 entries |
| Store-and-forward | Yes |
| Jumbo frames support | Yes |
| Static route | Yes |
| Throughput | 372 Gbit/s |
| Number of VLANs | 4093 |
| Security | |
| SSH/SSL support | Yes |
| IGMP snooping | Yes |
| Access Control List (ACL) | Yes |
| Authentication type | RADIUS, TACACS+ |
| IGMP proxy | Yes |
| DHCP features | DHCP client, DHCP relay, DHCP server, DHCP snooping |
| Multicast features | |
| Multicast support | Yes |
| Design | |
| Form factor | 1U |
| Product colour | Black |
| Stackable | Yes |
| LED indicators | Yes |
| Housing material | Metal |
| Rack mounting | Yes |
| Ventilation system | Front-to-back airflow |
| Number of fans | 3 fan(s) |
| Country of origin | Taiwan |
| Performance | |
| Noise level | 60 dB |
| Firmware upgradeable | Yes |
| Packet buffer memory | 4 MB |
| Stackable | Yes |
| Power | |
| Power consumption (max) | 1650 W |
| Power supply included | Yes |
| AC input voltage | 100 - 240 V |
| AC input frequency | 50 - 60 Hz |
| Power source | AC |
| Power over Ethernet (PoE) | |
| Total Power over Ethernet (PoE) budget | 720 W |
| Power over Ethernet (PoE) | Yes |
| Operational conditions | |
| Storage temperature (T-T) | 0 - 50 °C |
| Operating temperature (T-T) | 0 - 40 °C |
| Operating relative humidity (H-H) | 10 - 90% |
| Heat dissipation | 715 BTU/h |
| Virtual LAN features | |
| VLAN support | Yes |
| Number of VLANs | 4093 |
| Weight & dimensions | |
| Width | 442 mm |
| Depth | 440 mm |
| Height | 44 mm |
| Weight | 6.3 kg |
| Packaging content | |
| Rack mount kit | Yes |
| User guide | Yes |
| Cables included | AC, Micro-USB, Serial |
| Technical details | |
| Form factor | 1U |
| Product colour | Black |
| Stackable | Yes |
| Noise level | 60 dB |
| Housing material | Metal |
| Firmware upgradeable | Yes |
| Rack mounting | Yes |
| Memory | |
| Packet buffer memory | 4 MB |
| Indication | |
| LED indicators | Yes |
| Packaging data | |
| Rack mount kit | Yes |
| User guide | Yes |
| Cables included | AC, Micro-USB, Serial |
| Other features | |
| Ethernet LAN data rates | 1000,100,2500 Mbit/s |
| Country of origin | Taiwan |
| Logistics data | |
| Country of origin | Taiwan |
| Customs product code (TARIC) | 85176200 |